Registration and Assembly of Bare Modules

This page is used to register the bare module and the first step is uploading the excel file containing the sensors and the front-end chips manufacturer as in the example (could download it by clicking on download example).

The inserted data table appears and is sorted to ensure that they are found in the ITk production database. A table of all the components’ information appears with different colors to distinguish the type of component.

As in the following picture, a set of bare module properties could be chosen by selecting the front-end chips version (RD53A-ITkpix_v1- ITkpix_v1.1- ITkpix_v1.2-No chip) and the sensor type (L0 inner pixel 3D sensor tile - L0 inner pixel planar sensor tile – L1 inner pixel quad sensor tile- Outer pixel quad sensor tile – Dummy sensor tile) and vendor (Thin-Thick-IZM) and the last option set is the type of the bare module.

Setting the bare module serial number (SN) table is showing and there is an option for editing it. To ensure the existence of the selected bade module serial number in the database, click on check BARE_MODULE SerialNumbers. By clicking on Register, the chosen bare module would be registered into ITk production database.

At the end of the page, the bare model assembly where the sensor tiles and front-end chips assemble to the bare module in the database and there is an option of disassembling them will appear at the end of the assembly process.